[. . . ] Activate the opener only when door is in full view, free of obstruction and opener is properly adjusted. [. . . ] Drill 4mm (5/32") holes and use anchors (6) if installing into drywall. A convenient place is beside the service door and out of reach of children. Run the bell wire up the wall and across the ceiling to the garage door opener. The receiver quick connect terminals are located behind the light lens of the opener. Connect the bell wire to the terminals as follows: white/red to red (1) and white to white (2). Multi-function Door Control: Press the white square to open or close the door. Light Feature: Press the Light button to turn the opener light on or off. If you turn it on and then activate the opener, the light will remain on for 2-1/2 minutes. [. . . ] Anslut signalledningen till följande kontakter: vit-röd till röd (1) och vit till vit (1). [. . . ]